Established in the mid 1970's, New England Biolabs, Inc. (NEB) is the industry leader in the discovery and production of enzymes for molecular biology applications and now offers the largest selection of recombinant and native enzymes for genomic research. NEB continues to expand its product offerings into areas related to PCR, gene expression, sample preparation for next generation sequencing, synthetic biology, glycobiology, epigenetics and RNA analysis. Additionally, NEB is focused on strengthening alliances that enable new technologies to reach key market sectors, including molecular diagnostics development. New England Biolabs is a privately held company, headquartered in Ipswich, MA, and has extensive worldwide distribution through a network of exclusive distributors, agents and seven subsidiaries located in Canada, China, France, Germany, Japan, Singapore and the UK. For more information about New England Biolabs visit neb.
Faster, Cooler DNA gels
Content sponsored by New England Biolabs
All over the world, molecular biologists are tragically wasting hours of their life running DNA gels using tris-based conduction buffers like TBE or TAE.
These buffers are known to overheat at high voltages, causing problems with gel integrity, sample denaturation and more. Because of this, molecular biologists are forced to keep the voltage of their gels to a maximum of 5-10 volts/cm (e.g 100 volts for a 10 cm gel) and extend the running time, sometimes to hours.
Although long gel runs, like long restriction digests, are often used as a convenient coffee break opportunity they can also eat into the molecular biologist’s precious time, leading to longer and less efficient working days.
But, in 2004, a team of scientists from Johns Hopkins came up with solutions (pardon the pun) to this problem. They have developed and verified three conductive buffers that stay cool during electrophoresis, allowing the voltage to be racked up to a massive 35 volts/cm without any problem, reducing the time taken to run gels by up to 7 times.
Between them, the three buffers cover all of the molecular biologist’s DNA gel needs. The buffers are:
- 10mM sodium boric acid (Na2B4O7/Borax)
For standard applications (separation of DNA fragments from 100bp-5kbp). - 5mM lithium acetate (LiOOCCH3, CAS:546-89-4)
For separation of fragments longer than 3 kbp. - 1mM lithium boric acid (Li2B4O7, CAS:12007-60-2)
For separating small DNA fragments and ssDNA
Our lab’s standard DNA gel buffer has become 20 g of Borax into 1 l of water which gives a 20x stock solution. Small gels run in 10-15 minutes at 200V.
The sodium borate and lithium acetate buffers can also be used for RNA gels in place of MOPS buffer.
Simply make up the required buffer, use the same buffer in the gel and the tank, turn up the voltage to 10-35 volts/cm and watch that DNA go.
Despite this excellent work, there are still thousands of molecular biologists who have not yet been shown that there is an alternative to wasting their precious hours using tris buffered gels.
Help us to eliminate this tragedy by spreading the word about this method for faster, cooler DNA gels. You can do this by clicking the link below this article to e-mail it to your molecular biologist friends. We, and they, thank you for your help.
Further reading:
1. Brody and Kern(2004) Biotechniques 36 p214
2. Brody et al (2004) Biotechniques 37 p598 (Free registration required)
3. Hudson, Biocompare protocols (a protocol giving a quick overview)
Photo: Klis
28 Comments
Leave a Comment
You must be logged in to post a comment.
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Tried this ~ 2 years ago and, whilst succesful at running gels without overheating in < 15 min, the bands were definitely more smeared and less sharp than a typical ‘slow’ TAE/TBE gel. In the original paper the bands look fine but I was unable to reproduce that at the higher voltages. In my experience: useful to check quickly if a PCR has worked but not something I’d put in a thesis/paper.
I tried running my gel with lithium acetate buffer at 300v but i observed the heating effect and it did not turn well!I’ve attached the picture below.Any suggestions
20x Lithium Acetate: 6.6g lithium acetate, Made up to 1 L with water.
https://img329.imageshack.us/img329/1927/highvoltagerunvr5.png
You can also prepare this buffer by making up 10mM NaOH and adjusting the pH to 8.5 with boric acid powder. We routinely run our gels at 150v, and sometimes at 300v although the gel chambers don’t like it very much. The drop well systems seem to handle the higher voltages much better. Perhaps even run it in the cold room. I know in one part of the papers above, they resolved nucleic acid at 1000v in 5 minutes.
I want to add that the new buffers (which really are old, but just haven’t been used for agarose gels before) also give you cleaner bands. In addition, SBA is cheaper than TBE/TAE.
Some of the links say this buffer should be used for 100bp – 5kbp resolution. I will experiment with this, but I wanted to know if anyone regularly uses this buffer for larger bands? It seems like running the gel longer and a little cooler (more like tradtional TBE gels) should allow for this, but I’m pretty ignorant about electrophoresis buffers.