Skip to content

Biotium offers a range of novel fluorescence-based reagents and kits for life science research, in addition to a full selection of classic fluorescent dyes and reagents. Biotium products are available through direct sales from our headquarters in the San Francisco Bay Area, and through our distributors in the U.S. and worldwide. At Biotium, innovation is at the very heart of what we do every day. We devote a significant amount of resources to R&D and IP protection, which have resulted in a growing number patents covering a wide array of molecular and cellular biology applications.

Ethidium Bromide: The Alternatives

Posted in: DNA / RNA Manipulation and Analysis

Content sponsored by Biotium

Ethidium Bromide alternatives

How can you avoid the perils of exposing DNA to UV light during cloning procedure? Use an alternative DNA stain! Ethidium bromide is not your only option. In this article, we will compare the available DNA stains that can be used in electrophoresis to clarify the options available to you.

Ethidium Bromide

The classic DNA stain. Ethidium bromide (EtBr) is a flat molecule that fits between adjacent base pairs (intercalates) in the DNA double helix. It has UV absorbance maxima at 300 nm and 360 nm and can also absorb energy from nucleotides excited at 260 nm. The absorbed energy is emitted as orange/yellow light at 590 nm. The fluorescence of EtBr is significantly higher when intercalated than it is in aqueous solution.
Protocol: Can be used in the gel at or as a post-stain at a concentration of 0.5 mg/L
Detection: UV light
Sensitivity: Can detect bands of 1–5 ng
Toxicity: Toxin, mutagen, tetratogen and carcinogen according to a variety of tests but effects on higher organisms have not been proven (see here)
References: Karsten, U. and Wollenberger, A. Anal. Biochem. 77, 464-470, (1977)

Methylene Blue

Methylene blue is member of the thiazin family of dyes that ionically bind to DNA and RNA. Because its interaction with DNA/RNA is weak, methylene blue is not a very sensitive stain. However, it has the advantage that is detectable in the visible range. Destaining in water may be required for maximum sensitivity.

Protocol: Post strain only, in 0.025% (w/v) methylene blue in water.
Detection: Visible light.
Sensitivity: 40–100 ng bands are reported to be detectable after de-staining.
Toxicity: Non-mutagenic. Somewhat toxic if ingested.
References: Yung-Sharp, D. and Kumar, R. (1989) Technique 1 (3) 183-187.

Crystal Violet

Crystal violet intercalates into DNA in a similar manner to ethidium bromide but is less mutagenic. Its major advantage is that it is detectable in the visible range—so, no need for UV exposure.
Protocol: Use in gels at a concentration of around 1.2 mg/mL
Detection: Visible light
Sensitivity: 100–200 ng bands are reported to be detectable
Toxicity: Mutagen (less so than ethidium bromide)
Reference: Rand, K.N. Elsevier Trends Journals Technical Tips, Online, T40022, 1996.

SYBR Safe

SYBR safe is a commercial DNA stain manufactured by Invitrogen. It is marketed as less harmful than ethidium bromide, but this is debatable. Its major advantage is that it is as sensitive as ethidium bromide but does not require UV light for visualization.
Protocol: SYBR safe is used as an in-gel stain only. It is supplied in ready-made buffers so the working concentration is unknown.
Detection: For visualising fragments required for downstream applications, the best (although more expensive) option is to use a blue light box as the wavelengths used do not cause DNA damage. UV-transilluminators can also be used, although specific filters may be required.
Sensitivity: As sensitive as ethidium bromide – bands of 1-5ng should be detectable.
Toxicity: Documented as less mutagenic that ethidium bromide, but it’s acute toxicity is higher
Reference: Invitrogen’s SYBR safe product page

Gel Red

Gel Red is a commercial DNA stain manufactured by Biotium. It is marketed as being the most safe, sensitive and robust nucleic acid gel stain. Also, it is less mutagenic than ethidium bromide and more stable in storage than SYBR safe. Like ethidium bromide, Gel Red is visualized using UV light.
Protocol: Gel red can be used as post stain or in-gel stain. It is supplied in ready-made buffers so the working concentration is unknown.
Detection: UV: excitation at 300 nm, emission at 595 nm—so conventional UV transilluminators are sufficient.
Sensitivity:Bands of 0.25 ng can be detected.
Toxicity: Less mutagenic than ethidium bromide.
Reference: Biotium’s Gel Red product page

Share this to your network:

15 Comments

  1. Leah on January 9, 2020 at 10:12 pm

    Have you heard about Diamond Nucleic Acid Dye from Promega?

    Also, it would be helpful to include publishing dates to make age of articles more transparent…

    • Thomas Warwick on February 29, 2024 at 9:37 am

      Hi, Leah. Thank you for your comment. I haven’t heard about this product. The publication dates for Bitesize Bio articles are at the top of all our articles, beneath the title. If the article has been refreshed or updated, the publication dates of the original and revised versions are included at the bottom of the article in italics.

  2. James on March 6, 2018 at 6:45 pm

    Hi,

    Biotium put together an interesting comparison of many popular ethidium bromide alternatives, looking at cell permeability, safety, and sensitivity. You can find it at the following link:
    https://biotium.com/wp-content/uploads/2017/02/Gel-Stains-Comparison.pdf

Leave a Reply Cancel Reply

You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll To Top