Skip to content

5 ways to Damage DNA

Posted in: DNA / RNA Manipulation and Analysis

DNA can be damaged in a number of ways. Although the level or type of damage may not affect your experiments, sometimes enough damage can be sustained to ruin them.

Forearmed is fore-warned so here are 5 ways that your DNA can be damaged. Now you can do your best to ensure that any damage is minimised, giving your experiment the best chance of working.

1. Exposure to UV light. I have gone on about this so many times it is getting boring. But the fact remains that UV light causes thymine dimers and has wrecked many a good cloning experiment. So minimize you sample’s exposure to UV, especially the more damaging short-wave variety. Enough said.

2. Mechanical shearing. Excessive rough handling (e.g. pipetting or vortexing) of DNA can cause breaks and nicks. The longer the DNA, the more sensitive it is to shearing so treat things like gDNA especially carefully if you require intact DNA.

3. Phenol extraction.
Phenol can oxidise bases, especially guanine. The oxo-guanine which can mis-pair with adenine, resulting in faulty replication and mutagenesis. Good job there’s hardly any need to do any phenol extraction any more!.

4. Dessication. Breaks and nicks, as well as base oxidation, can also be caused by harsh drying of DNA. This was shown under particularly harsh experimental condition, in which samples were dried rapidly in silica, but it is probably a good idea to avoid over-drying DNA anyway in general to prevent this sort of damage.

5. Heating. In aqueous solution, DNA is subject to oxidation and acid hydrolysis damage. Like most chemical reactions, these speed up as the temperature increases, which is why we store DNA at low temperatures and you should avoid excessively heating your DNA samples.

Now you know. So go easy on your DNA samples!

Share this to your network:

6 Comments

  1. Superman on August 1, 2009 at 7:55 pm

    Can you expand some more on “Good job there’s hardly any need to do any phenol extraction any more!”?

    • Nick on August 3, 2009 at 1:12 pm

      Hi Superman

      I mean that there are other ways to clean up DNA nowadays so it is easier to avoid using phenol extraction if you don’t like it.

      see: https://bitesizebio.com/2007/10/25/5-ways-to-clean-up-a-dna-sample/ for details.

      I don’t like phenol extraction because I find it is easy to leave traces of the solvents, which can ruin an experiment. But it is also a matter of personal taste – I don’t mind kryptonite but I believe you have an aversion to the stuff 🙂

  2. Fahmin on March 31, 2009 at 7:59 am

    Does crushing samples in liquid nitrogen shear DNA?like dry leaves?

  3. Rey on February 8, 2009 at 10:06 am

    A good and useful tip to avoid UV exposure is to use dyes that are excited by visible light – blue light. You can avoid UV and ethidium bromide altogether. E-Gels are gels that are incorporated with these dyes if you’re looking for a cleaner faster way to view and purify your DNA.

  4. Steve on September 10, 2008 at 4:17 pm

    From what I’ve done and read I think you might be a bit paranoid, but I also think it depends on what you are using the DNA for. Either way, I just try to limit the number of freeze-thaw cycles just to be safe.

  5. MolBioMonk on September 10, 2008 at 3:30 pm

    What about freezing? or am I just paranoid

Leave a Reply Cancel Reply

You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll To Top