Skip to content

Using a Gel Filtration Chromatogram to Estimate Molecular Weight

Posted in: Analytical Chemistry and Chromatography Techniques
Man estimating size of object to refelct using a gel filtration chromatogram to estimate molecular weight

Want to determine the molecular weight of a particular sample or protein? Gel filtration chromatograms are one fairly easy method. They are created using gel filtration chromatography (also known as size exclusion chromatography, molecular sieve chromatography, or gel permeation chromatography), a technique based on the differential distribution of the components in a sample between the mobile and stationary phases.

Specifically, in gel filtration chromatography, this differential distribution depends on the size and shape of the components.

Here, we take a more in-depth look at how the column fractionates the components in your sample and how the gel filtration chromatogram is used to determine molecular weight.

The Gel Filtration Column is not Your Typical Sieve

In gel filtration chromatography, the stationary phase is comprised of porous beads packed into a column. The mobile phase is the running buffer or other solvent. Sample components partition between the stationary and mobile phases based on their size-based accessibility to the pores of the matrix beads.

The smaller the size of the molecule or particle, the greater access it has to the pores of the matrix (or the accessible stationary phase), and the slower it moves through the column.

  • Very large particles, which are completely excluded from the pores, elute first from the column at the void volume (V0).
  • Analytes of intermediate sizes somewhat permeate into the pores and elute next.
  • Very small molecules with high access to the pores, elute last just before one column volume of buffer has passed through the column (called total accessible volume [VT]).

Therefore, although a gel filtration column separates particles by size, it is not a conventional sieve, which has pores of a uniform size.

The separated components are visualized as a plot of the volume of the mobile phase eluted through the column versus the detector signal. This plot, called a gel filtration chromatogram, shows the location of the individual peaks and the quality of resolution of these peaks.

Take a Look at an Example

In the gel filtration chromatogram in Figure 1, there are two well-separated peaks corresponding to the two components (A and B) in the sample. 

Example of how a gel filtration chromatogram is created

Component A (red) requires solvent of volume Ve (A) to elute at its maximum concentration. Given that component A is completely excluded from the stationary phase (beads’ pores), Ve (A) = V0.

Component B (green) has near-complete access to the pores of the matrix. Therefore, its flow through the column is retarded. It elutes just before one column volume worth of the solvent can pass through the column (i.e., its elution volume, Ve (B), is almost equal to VT).

The location of the peaks, their heights, and widths convey a great deal of information about the sample components as well as the column.

Importantly, you can use peak locations to determine the molecular weights of the sample components. Let’s see how this is done.

How to Estimate The Molecular Weight Using a Gel Filtration Chromatogram

The distribution of an analyte between the stationary and mobile phases depends on its size. It is described by a parameter called its equilibrium distribution coefficient (Kd). Kd is the ratio of the concentrations of the component in the stationary and the mobile phases. For component A, Kd = 0, since it cannot access the pores of the stationary matrix. For component B, Kd can be written as:

K_{d} = \frac{ V_{i} }{V_{0}}

where Vi is the total solvent-accessible volume of the pores of the beads.

The smaller the particle, the more it permeates into the pores of the beads, and therefore, the larger the Kd value. So, Kd depends on particle size. It is essential to determine Kd to estimate particle size.

Finding The Equilibrium Distribution Coefficient

It is difficult to determine the concentrations of an analyte in the stationary and mobile phases. Therefore, you express Kd in terms of the easily measurable parameters, Ve and Vo.

We know that the flow of component B through the column is retarded and it elutes at volume Ve (B). The volume (Ve(B)V0) is the ‘extra’ stationary phase volume that B is able to access by virtue of its small size. This ‘extra’ volume is a component of the internal pore volume Vi, and the partition coefficient of B can be expressed as a fraction of Vi. Therefore,

K_{d} = \frac{ V_{e} - V_{0} }{V_{i}}

Or

K_{d} = \frac{ V_{e} - V_{0} }{V_{T} - V_{0}}

VT is the total solvent accessible volume, a parameter that is difficult to measure. Therefore, substitute VT by the term Vc, which is the total geometric volume of the column:

K_{av} = \frac{ V_{e} - V_{0} }{V_{C} - V_{0}}

where Kav is not a true partition coefficient but is easily determined.

That was not too difficult, was it? Nothing works like quantification to help clear concepts!

From Kav to Molecular Weight

There is a linear relationship between the Kav of molecules and the logarithms of their molecular weights over a considerable size range. You can exploit this relationship to determine the molecular weight of an unknown sample.

First, determine the Kav values for a set of standards of known molecular weights.

Second, plot these Kav values against the logarithmic values of the corresponding molecular weights to get a “selectivity curve.” For example, Figure 2 shows a selectivity curve for a popular, pre-packed gel filtration column determined using a set of commercially available protein standards.

You can then use the calibration curve to determine the molecular weight of your protein of interest.

gel filtration 6

Considerations

Note that you must choose the molecular weight standards carefully; take the range of pore sizes in your matrix beads into account.

Additionally, bear in mind, this assumes that the molecular shapes of the standards and your samples are the same. Commercially available protein standards are largely globular in shape. If your protein has an elongated shape, then the determined molecular weight is likely to be inaccurate.

In such cases, use analytical ultracentrifugation or gel filtration coupled with multiple angle light scattering for molecular weight determination.

Whew! Hope you are not all tired out. If you’re ready for more, see our related articles on:

The Basics of Running a Chromatography Column

How Separation Works in Column Chromatography Methods

Originally published September 2016. Reviewed and updated September 2021.

Further Reading

Share this to your network:

2 Comments

  1. Sonia on August 24, 2017 at 7:14 am

    According to the reference number 1 file:///C:/Users/trtaz/Downloads/Size%20exclusion%20chromatography%20handbook.pdf
    the lower molecular weight peak will be lower as compared to the higher molecular weight, but in your site its oppositely discussed
    which is a great confusion please clarify it



    • ming-chung Kan on February 9, 2020 at 1:50 am

      The peak height has nothing to do with molecular weight, it is only relevant to the amount of marker loaded or more precisely, the optical absorption at 280 nm.



Scroll To Top